Certbus > HP > HPE ATP - Hybrid IT Solutions V2 > HPE0-V14 > HPE0-V14 Online Practice Questions and Answers

HPE0-V14 Online Practice Questions and Answers

Questions 4

DRAG DROP

A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.

Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

Select and Place:

Browse 301 Q&As
Questions 5

DRAG DROP

A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers. Identify the correct server and storage to meet the customer requirements.

Select and Place:

Browse 301 Q&As
Questions 6

Refer to the exhibit.

You are asked to review a server configuration for a customer before it is quoted. The server will be used in a business-critical environment and high availability is required. The server configuration is shown in the exhibit.

What should be added to the configuration to ensure availability?

A. HPE Smart Array P408i-a SR Gen10 12 G SAS Modular Controller

B. HPE DL380 Gen10 Intel Xeon-Gold 6143 (2.8 GHz/16-core/205 W) Processor Kit

C. HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

D. HPE DL38X Gen10 12 Gb SAS Expander Card Kit

Browse 301 Q&As
Questions 7

A customer ordered a pair of HPE SN3000B 16 Gb Fibre Channel Switches to provide Fibre Channel connectivity between VMware ESXi hosts and HPE 3PAR StoreServ 8200. Which adapter i s required to support Fibre Channel connectivity from the VMware ESXi hosts to the new switches?

A. HBA

B. SAS

C. CNA

D. NIC

Browse 301 Q&As
Questions 8

A customer acquires an HPE 3PAR Storeserv 8200 Solution for a data center environment with the following configuration:

2 Controllers Nodes Physical Service Processor 2-tier configuration using 16 SSD and 12 NL HDD 2 SN3000 San Switch each with 24 FC ports After installation and configuration, the storage is put in production. When tiering with the Adaptive Optimization SW is being performed, the customer encountered performance differential issue.

What could be the cause of this issue?

A. Disk enclosure are insufficient.

B. File Controllers is missing.

C. All-inclusive Multi-system software is missing.

D. Solid State Drives and Nearline Drives are mixed.

Browse 301 Q&As
Questions 9

A local state college is implementing a new VDI cluster to support computer and testing labs. They have the following requirements:

1.

Three VMware ESXi Hosts, each with one AMD processor, 1 TB of RAM, 16 Gbps FC Dual Port HBA.

2.

HPE Nimble AF20 with 17 TB usable capacity.

3.

Integration into an existing HPE FlexFabric 5710 and HPE SN3000B Fibre Channel SAN switches.

4.

The solution must fit in 7U of rack space. If the customer needs more capacity in the future, they will use scale-out growth. Which server model should you recommend to this client?

A. HPE DL385

B. HPE DL380

C. HPE DL360

D. HPE DL325

Browse 301 Q&As
Questions 10

A system administrator is performing the BIOS/Platform configuration of a DL380 Gen10 servers You notice the amber health LED. The health status of which solution components can be verified with embedded UEFI Diagnostics? {Select two.)

A. Primera node

B. iLONAND

C. FC HBA

D. Processor

E. Power Supplies

Browse 301 Q&As
Questions 11

A customer has redundant SAN fabrics with a single HPE SN6000B 16 GB 48-port.24 SAN switch in each fabric. They plan to expand their virtualization environment by adding two HPE DL360s and an MSA 2042. Each DL360 will connect to the fabric via dual port 16 Gbps FC HBAs, and the MSA 2042 will connect with four FC Ports. The 24 ports on each switch are currently In use for other applications.

How many additional Port on demand licenses must be customer purchase for each switch if they redundantly connect all the new FC HBA ports to their existing SN600B switches?

A. 1

B. 4

C. 8

D. 12

Browse 301 Q&As
Questions 12

A customer has a single ProLiant DL560 Gen 10 running a virtualization system. They want to validate installed firmware components at the hardware level. Which built-in management tool should they use to complete this task?

A. HPE OneView Advanced

B. ILO 5 Advanced

C. UEFI

D. HPE intelligent Provisioning

Browse 301 Q&As
Questions 13

Why is RAID 6 the best option for a large RAID set for archive storage on large-capacity drives?

A. to reduce risk during volume rebuild

B. to increase write performance on the volume

C. to maximize capacity of the volume

D. to reduce drive wear

Browse 301 Q&As
Questions 14

You are troubleshooting an HPE ProLiant rack-mount server. You need to run diagnostic tests on local storage.

Which HPE tool should you use?

A. iLO

B. Intelligent Management Center

C. Smart Storage Administrator

D. OneView

Browse 301 Q&As
Questions 15

A customer plans to purchase five HPE DL380 Gb 2-port 530SFP Ethernet Adapters. The customer's network administrator has Installed a top of rack 10 GbE switch capable of supporting copper and optical connections. The customer is already over budget and needs to keep costs down.

Which option should you recommend Tor connecting to the switch?

A. 3m OM3 Fiber Optic Cables

B. 3m Cat 6A Copper Cables

C. 3m Direct Attached Copper Cables

D. 3m OM2 Fiber optic cables

Browse 301 Q&As
Questions 16

You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.

How should you install the PDUs to maximize power distribution and space efficiency?

A. at the top of the rack with the cables running between the RETMA rails

B. horizontally on extension bars mounted directly to the frame for improved clearance

C. in the bottom bay of the rack with the outlets facing the front

D. vertically, side by side on both sides of the rack with the outlets facing the center

Browse 301 Q&As
Questions 17

You need to update the firmware on an MSL2024.

Which HPE utility do you need to use?

A. Smart Storage Administrator

B. OneView Standard

C. Central Management Console

D. Library and Tape Tools

Browse 301 Q&As
Questions 18

A customer needs to virtualize their storage across physical servers and storage environments.

Which HPE solution meets the customer's needs?

A. Nimble CS3000

B. StoreVirtual 4335

C. StoreVirtual VSA

D. MSA 2050

Browse 301 Q&As
Exam Code: HPE0-V14
Exam Name: Building HPE Hybrid IT Solutions
Last Update: Mar 25, 2024
Questions: 301 Q&As

PDF

$45.99

VCE

$49.99

PDF + VCE

$59.99