3100.1 Online Practice Questions and Answers

The Avaya Extension to Cellular feature provides users with the capability to have one administered telephone that supports communication manager features for both an office telephone and one outside cellular or wireless telephone, two

fields must be set to "Yes" in order to use this functionality:

Enhanced EC500 and extended Cvg/Fwd Admin.

Which command do you use to verify the field settings?

A. System-parameters features

B. System-parameters customer-options

C. System-parameters wireless

D. System-parameters converge-forwarding

You have to add a new G650 Media Gateway to the system. Which command will perform this I

A. add cabinet next

B. add port network next

C. add media ?gateway next

D. add G6SO-port next.

You need to configure a station so that when a department manager makes calls to employees the manager's calls will ring even though the called station might have Sent All Calls activated. Although the manager's station can be designated as a VIP telephone, the manger must be able to selectively activate this feature. Which feature addresses this need?

A. Button activated Executive Calling

B. FAC or button activated Automatic Inclusion

C. FAC or button activated Priority Calling

D. Button activated Send All Calls override

With reference to the list trace station 1101 printout shown in the exhibit, what statement describes what happened during the time period of the trace?

A. Station 1101 called station, hung-up and finally called station 100.

B. Station 1101 called station 1000, the unanswered call went to the voicemail, and finally station 1101 called 1001.

C. Station 1101 called station 1000, and the station answered, then station 1000 transferred to call to station 1001.

D. Station 1101 called station 1000, unanswered; the call covered the station 1001.

You are configuring Personal Station Access (PSA) and you configure the Communication Manager with the following settings:

-

Set TTI enabled = `Y'

-

Set PSA Associated code = `25' and disassociate code `#25'

-

Set security code for the station = `1234'

You activate the station by keying in FAC for PSA, station extension number, `#', the security code of the station, and `#'. However, the station is not activated. Which statement describes the issue to be addressed?

A.

You need to set TTI = `n'

B.

You did not enable PSA on the COS of the station.

C.

You should not set the security code in sequential order.

D.

You did not key in the correct activation sequence

Which setting in the system parameter feature screen will enable TTI to be applicable to both analog and digital stations?

A. Terminal Trans. Init.? Y, TTI state = `voice', TTI enable = `y', TTI security code = `1709', CTI enabled = `n'.

B. Terminal Trans. Init.? Y, TTI state = `data', TTI enable = `y', TTI security code = `1709', CTI enabled = `y'.

C. Terminal Trans. Init.? Y, TTI state = `vdata', TTI enable = `y', TTI security code = `1709', CTI enabled = `n'.

D. Terminal Trans. Init.? Y, TTI state = `voice', TTI enable = `y', TTI security code = `1709', CTI enabled = `y'.

Which statement most accurately describes the function of automatic call back feature?

A. It allows internal users who placed a call to a busy or unanswered external telephone to be called back when the called telephone becomes available.

B. It allows internal users who placed a call to a busy or unanswered internal telephone to be called back when the called telephone becomes available.

C. It allows internal users who are called when they are busy to activate a feature to automatically call back that second caller, once the first call is finished.

D. It allows internal users who are called when they are busy to place the second call on hold until the first call is finished.

You run a daily Occupancy Summary Measurements report to monitor system capacity and to review processor occupancy metrics. Which occupancy situation is an issue that warrants further analysis?

A. For two nonconsecutive hours, the idle Occ value was between 20 and 25 pervent.

B. For one hour, the combined SM Occ and idle Occ was 90 percent.

C. For two consecutive hours, the Static Occ and SM Occ were each below 10 percent.

D. For two consecutive hours, the combined Static Occ and CP occ was 77 percent

You are creating a new ISDN bunk group in a production system and you want to know the capacity and features that are enabled in the installed license file of the system. Which command will provide this information?

A. system -parameters capacity

B. system-parameters customer-options

C. system -parameters features

D. system-parameters customer-license

Your customer had a short WAN outage and you want to know If all of the gateways have re- registered with the Communication Manager server. Which Interface and command must be used?

A. ASA with a display process-status command

B. SMI with a process status command

C. SMI with a status summary command

D. ASA with a status media-gateway command

You must add 500 new stations with a four digit length, starting with station 4500. What information must you populate in the dial plan analysis form?

A. Dialed String = 4; Total Length =4; Call type = sta

B. Dialed String = 45; Total Length =4; Call type = ext

C. Dialed String = 4; Total Length =4; Call type = ext

D. Dialed String = 45; Total Length =4; Call type = sta

Scenario

A user reports that when attempting to dial an external call to local number the system does nothing ?just silence.

You interview the user as follows.

You: What happens if you longer after you dial your number? User: once I waited for about half a minute, then I heard these tones that supported the something was wrong.

You: Did the sound stay on the same pitch or did it change pitches back and forth? User: Back and forth one pitch higher than the other.

You: OK, that helps. What did you dial to get an outside line? User: Nine (9)

You: Thank you, I appreciate the information, I will get back with you shortly.

With reference to the scenario described in the exhibit, which statement most accurately describes the situation?

A. The user should have been able to complete the call as dialed

B. The system must be re-administered to correct the situation

C. After dialing "9" the user should have dialed more digits, then the external call would have completed

D. The user did not dial the correct access code to make an external call

Which parameters must be configured to implement Automatic Route Selection (ARS)?

A. Dial Plan, Codec Set, Private Numbering, Network Region

B. Far-End Node, Near-End Node, Coverage Path, Call Forwarding

C. Feature Access Code, Digit Analysis, Digit Conversion, Route Pattern, Trunk Group

D. MGC List, H 2<18 Link Timer, Call Admission Control. Feature Access Code

Which feature can you administer using a multi-appearance telephone with Console Permission?

A. Receive Security notifications of Authorization codes violation

B. Record integrated Announcements

C. Activate and deactivate Coverage paths for another extension

D. Add and remove agents from CORs

You execute the List history command to display the system transaction log. Which two types of Information do you expect to find in the transaction log or history report? (Choose two)

A. valid user logins and logoffs to or from the system

B. valid and invalid logins and logoffs to or from the system

C. recent, successful administration and maintenance commands to the system

D. recent successful and unsuccessful administration and maintenance commands to the system