300-610 Online Practice Questions and Answers

DRAG DROP

Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.

Select and Place:

DRAG DROP

An engineer must deploy a SAN that meets these criteria:

The upstream director switch must be configured to minimize the number of issued domain IDs

The access switch must aggregate multiple locally connected ports not a single uplink that shares the same domain ID as the upstream switch.

Drag and drop the port types from the right onto the boxes on the left to create a SAN topology that meets these requirements Not all port types are used Port types are used more than once.

Select and Place:

An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes, in addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6.

Which two components should be used to meet these requirements? (Choose two.)

A. mgmt0 interface

B. SSH protocol

C. SNMP

D. SVI interface

E. Telnet protocol

When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?

A. BGP ECMP

B. Layer 4 to Layer 7 device package

C. inline load-balancing device

D. ITD

Refer to the exhibit.

The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?

A. 9000 bytes

B. 2000 bytes

C. 2158 bytes

D. 2240 bytes

A network consultant evaluates the Ethernet Adapter Policy configuration to be applied to the Cisco UCS blade servers. The policy must minimize latency and increase throughput for sensitive applications. The solution must increase the CPU data cache hit rate to meet these requirements

Which policy is required?

A. AIC

B. ARFS

C. NVM-e

D. RDMA

Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

A. Cisco UCS Manager creates two separate fabric port channels.

B. Cisco UCS Manager creates a single fabric port channel.

C. The port channel is disabled until an administrator enables it manually.

D. Each uplink that connects an IOM is configured as a discrete link.

An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster. Which two UCS policies meet these requirements? (Choose two.)

A. scrub policy

B. vNIC policy

C. boot policy

D. firmware policy

E. LAN connectivity policy

A storage engineer requires a solution that achieves multiple paths between a server and storage array. The design must support complete traffic isolation and support a 50% growth in the next year.

Which FCoE solution meets these requirements?

A. single switch with multiple links

B. at least two VSANs across the fabric

C. at least two FC zone sets with multiple zones

D. single VSAN across the fabric

An engineer must design a solution to divide the workload across two different data centers and achieve redundancy in case of the failure of either data center Which solution must the engineer choose?

A. single Cisco HyperFlex stretched cluster

B. Cisco Hyperflex edge cluster

C. Cisco Hyperflex ROBO cluster

D. single Cisco HyperFlex standard cluster

A SAN fabric is built between a pair of Cisco MDS 9000 Series Switches. The requirement is for the ISL to use the VSAN ID to toward traffic from multiple VSANs across the same physical link. Additionally, the Fibre Channel trace feature must be supported.

Which ISL interface parameters are required to meet these requirements?

A. switchport mode TE switchport mode trunk vsan

B. switchport mode TE switchport mode trunk

C. switchport mode E switchport mode trunk vsan

D. switchport mode E switchport mode trunk

A company purchased a Cisco UCS system with four 5108 Chassis populated with UCS B-Series servers. The environment consists of nine Cisco HyperFlex rack servers. An engineer must provision virtual machines using an orchestration tool to optimize overall deployment time.

Which orchestration must be used to meet this requirement?

A. Cisco Intersight

B. Cisco DNA Center

C. Cisco AppDynamic

D. Cisco Network Assurance

A company owns a large-scale compute infrastructure that consists of over 1000 servers and virtual machines. The operational complexity continues to grow with additional policies and servers added to the environment. An infrastructure engineer is looking for an automation tool to reduce the operational complexity of configuring complex infrastructure. Because of the strict security requirements, the tool must be agentless, use the secure shell for transport, and be extendable using existing Python modules.

Which tool meets these requirements?

A. Puppet

B. NSO

C. Saltstack

D. Ansible

A engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure.

Which tool meets these requirements?

A. Cisco intersight

B. Cisco UCS director

C. Cisco data center network manager

D. Cisco tetration

An engineer must provide Layer 2 adjacency between data centers that are in two locations and separated by a routed network The adjacency must be based on Cisco Nexus 7000 Series Switches The solution must offload learning of host reachability information to the control plane to avoid excessive flood and learn congestion Also the data center in one of the sites experiences a large volume of unknown unicast traffic that the solution must mitigate Which data center interconnect technology meets these requirements?

A. VXLAN

B. OTV

C. VPLS

D. LISP