SNIA S10-201 dumps - 100% Pass Guarantee!

A two fabric merge has failed, leaving you with segmented fabrics. Investigation of the switch domain IDs shows that there is an ID conflict between two of the switches. What is the corrective action?

A. no action is necessary, the ID conflict will be resolved by negotiation

B. utilize the name server editor to change the domain ID within the fabric

C. change the domain ID on the switch that needs to be changed and allow negotiation to resolve the issue

D. take one of the switches offline (disabled), change the domain ID, and bring the switch back online (enabled)

You are trying to upgrade an existing 1Gb/s FC SAN that is using 62.5 micron multimode cable from a tape library to a server that is 175 meters away to 2Gb/s Fibre Channel. After switching to the 2Gb/s Fibre Channel equipment, a connection to the server cannot be maintained. When a connection is made, numerous errors are reported. What is the cause of the errors?

A. 2Gb/s Fibre Channel must convert to LC from SC connectors

B. 2Gb/s Fibre Channel must use 50 micron multimode cable

C. 2Gb/s Fibre Channel cable length requires an optical splitter

D. 2Gb/s Fibre Channel cable length has been exceeded

What is the primary reason for making an adjustment to the queue depth?

A. number of LUNs presented to the HBA changes

B. average size of I/O blocks going through the HBA changes

C. read/write ratio of I/O going through the HBA changesread/write ratio of I/O? going through the HBA changes

D. size of cache on the storage system changes

University IT has its storage subsystems and fabric switches distributed throughout the campus. Each college and department provides their own systems and staff. Central IT provides fabric, storage and backup administration. Which security mechanism is most important to protect fabric services?

A. node authentication

B. switch authentication

C. port authentication

D. link encryption

A fourway cluster is attached to two fabrics. Each member has two HBAs connected to each fabric. Each fabric has two subsystem connections. Each cluster member is a primary for one application. All LUNs appear on all storage ports with workload equally distributed across all. Each host has two dedicated HBAs for tape that can each see four independent LTO II (35MB/s) tape drives. All files are large and involve sequential I/O. Performance reporting shows a large read pending at the host during multi threaded backup. What is the most probably cause for the large read pending at the host?

A. native command queueing

B. SCSI Queue Depth too high

C. SCSI Queue Depth too low

D. throttling threshold is too high