NS0-192 Online Practice Questions and Answers

Click the Exhibit button.

A backup administrator notices throughput problems during backup jobs. While the job is running, you review the QoS output for the target volume.

Referring to the exhibit, which statement is correct?

A. The volume is encountering the QoS limit.

B. The network is slow.

C. The data layer of the controller is slow.

D. The traffic is going over an indirect path in the cluster.

Click the exhibit button.

Based on the QoS output from the storage controller, your database administrator is complaining of slow read and write performance.

Referring to the exhibit, what would be two appropriate actions to improve performance for both reads and writes? (Choose two.)

A. Move the workload to an SSD aggregate.

B. Apply a QoS maximum policy to the csdata-wid1234 workload.

C. Add a Flash Pool to the existing aggregate.

D. Upgrade the controller's NVRAM.

Click the Exhibit button.

On a ONTAP system, CLI commands for adding an initiator to an igroup on csiptc-2240-10 are failing, even when attempted several times on node csiptc-2440-10. However, the command works on node 09. You can create a volume on both nodes.

Referring to the exhibit, which two statements are true? (Choose two.)

A. vldb is functioning on both nodes.

B. The igroup cannot be created because the vigmgr is secondary on 10.

C. bcomd is causing the commands to fail.

D. mgmt is failing the operation.

When you expand an aggregate, the spare partitions can be added as only a new RAID group, even though the current RAID group size is large enough for the current and new partitions.

In this scenario, which statement is correct?

A. The partitions to be added share disks with the partitions in the existing RAID group.

B. RAID group size is used only when dealing with non-partitioned disks.

C. Only nonpartitioned disks can be added to a RAID group with existing partitions.

D. The aggregate must be converted to RAID-TEC to expand RAID groups using partitions.

A customer explains that the Active IQ section of the NetApp Support site indicates that their controller has not called home within the past three months. They are not using a mail host to deliver AutoSupport notifications. When troubleshooting the AutoSupport message, you enter the event log show messagename asup.post* command.

In this scenario, what would you expect to see on the console?

A. event-management system (EMS) events for the AutoSupport system that are related to SMTP

B. a history of all error events related to the AutoSupport system

C. event-management system (EMS) events for the AutoSupport system that are related to HTTP/HTTPS

D. event-management (EMS) events for the AutoSupport system that are related to any protocol

You order a FAS8200 cluster with 4 TB SATA drives. Before executing the cluster setup command, you notice that ADP is not being used.

In this scenario, which statement is correct?

A. Halt the nodes and configure ADP at the LOADER-X> prompt.

B. Complete the cluster setup and use OnCommand System Manager to configure ADP.

C. While executing the cluster setup command, reconfigure the disks to use ADP.

D. Halt the nodes, boot to the special boot menu, and configure ADP.

A customer created a new volume on an SVM for testing. During the first day of testing, the customer copied data to the volume using NFS and consumed 75% of the free space. The second day of testing required the existing data to be deleted and replaced by an equal amount of different data. During the copy, an error message stated that the volume was full.

What would explain the observed error?

A. The user did not have permissions to the export.

B. The client lost connectivity to the export.

C. Vscan stopped the write due to an infection.

D. The old data is still contained within a snapshot.

Click the Exhibit button.

You are troubleshooting HA interconnect link connection errors.

Referring to the exhibit, which physical connections should you examine?

A. 1

B. 3B

C. 3A

D. 2

Click the Exhibit button.

Using the data shown in the exhibit, which two parts would you recommend replacing? (Choose two.)

A. PSU2

B. I/O module (IOM) 1

C. PSU1

D. I/O module (IOM) 2

A FAS8200 system fails to boot because of a corrupted image on the boot media. Which action would be performed to solve this problem?

A. Copy the boot image from the root volume of the node.

B. Download a network image using the netboot procedure.

C. Use the boot_recovery command from the LOADER prompt.

D. Execute the boot_primary command at the loader.

You are configuring the transport protocol settings and are connecting to storage systems that are running ONTAP.

Which two protocols are supported by SnapDrive for this task? (Choose two.)

A. HTTPS

B. RPC

C. HTTP

D. TCP

You have a vSphere Essentials Plus environment configured with NetApp LUNs for datastores. You are backing up the environment using the SnapCenter Plug-in for VMware vSphere. However, you are having problems performing restore operations using SnapCenter.

What is a reason for this problem?

A. NetApp Virtual Storage Console is required for restore operations.

B. Only NFS datastores are supported with SnapCenter.

C. A Windows-based vCenter Server is required.

D. VMware Storage vMotion is not licensed.

A customer can no longer connect to a data LIF after upgrading from ONTAP 9.1 to ONTAP 9.2. A packet trace shows the data LIF is responding to the initial SYN with a SYN/ACK. This SYN/ACK never makes it to the client.

In this scenario, which statement is correct?

A. ONTAP 9.2 does not have IP FastPath.

B. ONTAP 9.2 does not have Large Receive Offload.

C. ONTAP 9.2 does not have LACP.

D. ONTAP 9.2 does not have TCP Segmentation Offload.

Two end-users are both connecting to the same SMB share, but end-user A sees different files and folders than end-user B.

Which statement is correct in this scenario?

A. Access Based Enumeration (ABE) explains this behavior.

B. NetApp Storage Encryption (NSE) explains this behavior.

C. End-user A is authenticating with NTLM.

D. NetApp Volume Encryption (NVE) explains this behavior.

Which two conditions would prevent a normal giveback operation? (Choose two.)

A. the presence of failed disks

B. active SnapMirror transfers

C. connected NFSv3 sessions

D. the presence of a failed IOM module