You are preparing for the installation of a new 2-node cluster with ONTAP 9.7 using NL-SAS drives. Your customer wants to use the cluster exclusively with FlexGroups.
In this scenario, which two statements are correct? (Choose two.)
A. All NL-SAS drives are assigned only to one of the nodes.
B. A NAS protocol is licensed on both nodes.
C. A SAN protocol is licensed on both nodes.
D. All NL-SAS drives are divided evenly across both nodes.
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?
A. Active IQ scheduled reports
B. NetAppDocs output report
C. ONTAP System Manager
D. Active IQ Config Advisor worksheet
You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.
Which NetApp tool will verify which cluster interconnect switches support this configuration?
A. Active IQ Config Advisor
B. Interoperability Matrix Tool (IMT)
C. Hardware Universe (HWU)
D. mysupport.netapp.com site
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?
A. Add the ASA controllers to an existing 4-node cluster with NAS licenses.
B. ASA controllers can only be added to clusters that have existing SAN licenses.
C. ASA controllers can only be installed as a standalone HA pair.
D. Add the ASA controllers to an existing 10-node cluster.
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for
NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
A. A capacity license is required.
B. A subscription license is required.
C. A site license is required.
D. No license is required.
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
A. Configure an SNMP community string on the cluster.
B. Configure DNS on the cluster.
C. Configure a trap host on the cluster.
D. Configure a firewall policy and allow SNMP.
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
A. SVM data LIF
B. SVM management LIF
C. node management LIF
D. intercluster LIF
Before installing an 8-node cluster for a customer, you want to validate compatibility with existing hardware.
Which two tools would you use to validate the configuration? (Choose two.)
A. Active IQ Config Advisor
B. Interoperability Matrix Tool
C. Active IQ System Manager
D. Hardware Universe
You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer's requests are satisfied?
A. Perform a takeover of Node 2 to ensure that it does not run.
B. Assign all data LIFs to Node 1.
C. Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.
D. Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.
What are two ways to identify an AFF All SAN Array system? (Choose two.)
A. View the ONTAP System Manager system nodes.
B. View the ONTAP System Manager cluster settings.
C. Use the cluster image show CLI command.
D. Use the san config show CLI command.
In an ONTAP 9.7 cluster, which LIF role is used for sending AutoSupport, establishing Network Time Protocol (NTP), and loading software updates?
A. cluster management LIF
B. node management LIF
C. data LIF
D. cluster LIF
You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.
In this scenario, which two licenses are enabled on the cluster? (Choose two.)
A. iSCSI
B. CIFS
C. NVMe
D. FCP
You are asked to add a new HA pair to an existing 2-node switchless AFF A220 cluster. You must first convert to a 2-node switched cluster using Broadcom BES-53248 cluster switches.
Which two conditions must be fulfilled before you start the migration? (Choose two.)
A. All cluster LIFs must be in the up state and on their home ports.
B. The "Enabled Switchless Cluster" option must be manually set to "false".
C. All cluster LIFs must have an MTU size of 1500.
D. The 2-node switchless configuration must be properly set up and functioning.
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
A. private network
B. cluster LIFs
C. client network
D. management LIFs
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
A. Move the SAS cables to a new stack.
B. Enable in-band ACP.
C. Remove the Ethernet cables.
D. Disable out-of-band ACP.