HPE2-T37 Online Practice Questions and Answers

Your customer built a server profile for HPE Synergy Gen10 server and configured boot mode to Legacy BIOS. Which feature is not available for this Compute Module?

A. Boot from SAN

B. Secure boot

C. Workload profile

D. BIOS management

Refer to the exhibit.

Which statement about the logical interconnect shown is true?

A. The maximum supported number of the internal networks for logical interconnect is configured

B. For FC uplink sets, an additional uplink from second module should be added for redundancy

C. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth

D. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks

Refer to the exhibit:

A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?

A. The firmware repository is not defined within firmware compliance report

B. The firmware repository service must be restarted using maintenance connection

C. The refresh procedure must be performed on each logical enclosure to refresh firmware

D. All of the components are up to date and compliant with firmware baseline

A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup. How this task can be simplified while keeping the profile consistent?

A. Boot volumes can be created on demand and defined in the server profile template

B. An existing volume can be replicated automatically when creating a server profile

C. A single SAN volume can be created and utilized by all E Synergy Compute Modules

D. Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules

Refer to the exhibit.

Which statement about the storage pools shown is true?

A. Volumes created on the first storage pool cannot use data reduction technologies

B. Both storage pools are in a managed state and can be used for volume provisioning

C. HPE OneView can be used to configure volume replication between these pools

D. Both storage pools have a license applied that enables management of these pools

Which locations are supported for HPE OneView remote scheduled backup? (Choose two.)

A. SCP

B. HTTPS

C. SFTP

D. HTTP

E. FTP

Which statement about RoCE network restrictions is true?

A. RoCE networks are supported only when PVLANs are enabled

B. RoCE networks are not supported with HPE BladeSystem

C. RoCE networks cannot be configured when Virtual Connect modules are used

D. RoCE networks require Virtual Connect SE 32Gb FC Modules

Which statement about server hardware types is true?

A. Once selected in the server profile, the server hardware type cannot be changed, and a server profile can be moved only between the same type of servers

B. Server hardware type can be defined only for HPE Synergy and HPE BladeSystem, but it cannot be defined for HPE ProLiant or Apollo systems

C. Administrator has to manually define the server hardware type for any unique server architecture and mezzanine card combination

D. The server hardware type is automatically created when a server with unique architecture and mezzanine card configuration is added to HPE OneView

Which statement about HPE OneView Global Dashboard is true?

A. It is an application that can be installed on Windows or Linux system that will provide automated discovery of HPE OneView instances

B. It is a plugin to HPE Oneview that will allow integration of HPE oneView with VMware management and monitoring components

C. It is a virtual appliance that can aggregate health and inventory information from multiple HPE OneView appliances or HPE Composers

D. It is a plugin to vCenter Server that will allow management of the components added to HPE Oneview from vCenter server interface

Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?

A. A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased

B. A logical JBOD cannot be created during server profile creation and must be prepared in advance

C. Different types of the drives can be used within a logical JBOD as long as they have the same capacity

D. Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator

What is required to add a remote frame to the primary management ring?

A. UUD of the remote HPE Composer

B. Serial number of one of the remote frames

C. Remote frame Link Module IPv6 address

D. Request code from the primary HPE Composer

Which connection type can be defined within a server profile for an MPE ProLiant DL server?

A. iSCSI

B. RoCE

C. FC

D. Ethernet

A customer wants to estimate the cost of the licenses required to manage HP Synergy and some external components.

When component includes an HPE OneView license for management?

A. Compute Module

B. Storage Array

C. Master Module

D. Logical Enclosure

Refer to the exhibit.

Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?

A. There are not sufficient frames for highly available setup.

B. Some master modules only support a redundant setup.

C. Firmware on the master modules is too low to support highly available setup.

D. A dedicated license must be added to HPE OneView to enable this feature.

You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?

A. A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.

B. A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.

C. An external repository must be created, because standalone components are supported only In an external repository.

D. ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.