HPE0-S58 Online Practice Questions and Answers

HOTSPOT

An integrator needs to validate whether the datastore created for ESXi systems based on 3PAR virtual volume can support all DRS cluster functionalities.

Click on the parameter that the integrator needs to verify.

Hot Area:

HOTSPOT

A customer discovered performance issues with one of the volumes used by an application.

An integrator recommended changing the RAID level for this volume from RAID6 to RAID5 by moving this volume to a different CPG.

Click the option that will start this operation.

Hot Area:

What must an integrator do before an existing cluster can be imported to the HPE Composer?

A. The vCenter Server must be integrated with the HPE Composer

B. The cluster must be vSAN enabled

C. The HPE Composer must have at least two management interfaces to connect to the cluster

D. The cluster must be enabled for HPE Composer integration

What is the purpose of the OmniStack Accelerator card installed in HPE SimpliVity platform?

A. It performs inline data efficiency processing and deduplication

B. It provides very fast SSD capacity for demanding workloads

C. It provides graphic acceleration for VDI infrastructure

D. It accelerates CPU processing within a virtual machine

An HPE Synergy compute module has a template-based server profile with two identically configured connections, each containing five VLANs. What is the most efficient method the integrator can use to add a new VLAN to each connection?

A. Add the new VLAN to the network set configured in the profile template, and update the server profile from the template

B. Add the new VLAN under Edit server profile connections

C. Add the new VLAN to the network set configured in the profile template

D. Add the new VLAN under Edit server profile connections in the profile template, and update the server profile from the template

A customer tries to revert a data volume located on the HPE 3PAR array to a specific snapshot that was taken using HPE Composer, but the process fails. What must an integrator do to fix this problem?

A. Install the snapshot agent on the operating system to enable online snapshot operations

B. Select the "Force" checkbox to ignore the warning, and revert to the snapshot because this is a data volume

C. Navigate to the SSMC and revert to the snapshot using HPE 3PAR tools

D. Disconnect the volume from the server, then revert to the snapshot and reconnect back to the server

During a first-time installation of HPE Synergy, an external monitor is not available to the integrator. Which approach should the integrator take to perform the first-time setup?

A. Download MSTCS, connect the laptop to the front Panel Ethernet port, and open a RDP Session to 192.168.10.1 on port 443.

B. Download VNC Viewer, connect the laptop to the front Panel Ethernet port, and open a VNC-connection to 192.168.10.1 on port 5900.

C. Download Telnet, connect the laptop to the front Panel Ethernet port, and open a connection to 192.168.10.1 on port 8443.

D. Download PuTTY, connect the laptop to the front Panel Ethernet port, and open an SSH connection to 192.168.10.1 on any port (default is 22).

A customer is planning an HPE Synergy solution with 20 frames and needs to minimize the number of management ports that are required to connect the frames into the existing management network. Which procedure should the integrator use to address the customer's concern?

A. Connect the RJ-45 front ports of each frame to an external switch. Then, connect the uplink from the external switch into the customer's management network.

B. Connect FLMs from all frames to two external switches for redundancy. Then, connect the two uplinks from the two switches into the customer's management network.

C. Connect the RJ-45 front ports of each frame to two external switches for redundancy. Then, connect the uplink from the two switches into the customer's management network.

D. Connect FLMs from all frames into a management ring. Then, connect the management ring to the customer's management network using two uplinks.

Using SSMC, an integrator has added a new CPG on the HPE 3PAR StoreServ array integrated with HPE Composer.

The new CPG is not visible in the HPE Composer.

What must the integrator do to see the new CPG in the HPE Composer console?

A. Run the discovery process on the 3PAR StoreServ array from the SSMC interface.

B. Add the CPG using the HPE Composer interface.

C. Add the CPG to the Storage Components scope using the SSMC interface.

D. Run the refresh procedure on the 3PAR StoreServ array from HPE Composer

A customer has forgotten the password for the HPE Composer managing the customer's HPE Synergy infrastructure. Which information is needed to regain access to the console? (Choose two.)

A. management IP address

B. appliance IP address

C. serial number

D. request code

E. authorization code

An integrator is modifying the network uplink configuration of a Synergy environment that uses HPE Synergy 40Gb F8 Switch Modules for connectivity. What must the integrator do to make the necessary modifications?

A. Connect to the switch module using CLI and run the necessary configuration commands

B. Connect keyboard, monitor, and mouse to the Frame Link module, and run the network configuration wizard

C. Connect to HPE OneView running on the Composer module to modify the Logical Interconnect Group (LIG) configuration

D. Connect to the end-of-row (EoR) switches, and push the configuration to the switch modules

What is the main difference between HPE SimpliVity 2600 and HPE SimpliVity 380?

A. HPE SimpliVity 380 is shipped in 5-node cluster configuration, while SimpliVity 2600 offers flexible expanding

B. HPE SimpliVity 380 integrates with Hyper-V only, while HPE SimpliVity 2600 supports any virtualization platform

C. HPE SimpliVity 380 is licensed per virtual machine, while HPE SimpliVity 2600 is licensed per capacity

D. HPE SimpliVity 380 uses hardware deduplication, while HPE SimpliVity 2600 uses software deduplication

As part of a Synergy implementation, an integrator needs to create 100 networks in a Logical Interconnect Groups (LIG) configuration. The network administrator for the end-of-row (EoR) switches provides a CSV file with the networks that need to be created.

How should the integrator automate the creation of the 100 networks?

A. Upload the CSV file to the Composer, and execute the Create Networks wizard

B. Start HPE SUT to migrate the CSV file to a Synergy configuration file, and upload it to the composer

C. Use the HPE OneView PowerShell library to create the networks listed in the CSV file

D. Configure Image Streamer to automate the network configuration

A customer has a five-frame Synergy deployment with redundant Composers. An integrator needs to install Image Streamer. What must the integrator consider before taking the planned action?

A. Image Streamer requires the use of the MGMT port from both of the FLMs in the frame where the Image Streamer appliance is installed

B. The frame where the Image Streamer is being installed must not contain an Interconnect Module

C. The location of the Image Streamer must be manually modified through the Composer

D. A connection to the management network must be established to an FLM in the same frame that houses the Image Streamer

How can an integrator increase the efficiency with which a Synergy solution can be provisioned? (Choose two.)

A. Use a Multimodule Link Aggregation Group (MLAG) to automate link failover

B. Use Composer as a PXE server to automate OS deployments

C. Enable all the compute nodes to boot from SD card in a server profile

D. Implement Image Streamer to provide a stateless OS environment

E. Use Powershell to automate configuration and application of server profiles