HPE0-S57 Online Practice Questions and Answers

DRAG DROP

Match the HPE Service to the service it provides. (Choose all that apply.)

Select and Place:

DRAG DROP

Match the appropriate server, storage, or networking platform to the workload. (Choose all that apply.)

Select and Place:

HOTSPOT

During Synergy solution onboarding, the customer asks about a firmware overview of all the compute modules at once.

Click where you can access the information.

Hot Area:

A customer is looking to virtualize desktops and application access to provide better business continuance and disaster recovery. They also need simplified deployment and the ability to scale out in the feature. Which HPE platform should you recommend?

A. Edgeline

B. ProLiant DL

C. Superdome Flex

D. SimpliVity

A customer is purchasing a full rack of DL380 Gen10 servers. They are under a severe time constraint and would like the servers to be ready to receive applications upon power up. What should be recommended to satisfy this requirement?

A. Use HPE Proactive Care services.

B. Use HP Pointnext service patching and OS installation services.

C. Include a Customer Intent Document with the order, requesting OS installation services.

D. Nothing additional: all servers arrive from the factory ready for application deployment.

A customer asks you about the features of the HPE SimpliVity, such as performance, availability, efficiency, and protection. Which statement is correct about an HPE SimpliVity solution that enables these features?

A. The OmniStack Accelerator Card (OAC) contains a FPGA programmed with HPE SimpliVity deduplication, compression, and optimization algorithms.

B. The OmniStack Accelerator Card (OAC) connects directly to the iSCSI VIP address enabled by the OVC.

C. The OmniStack Accelerator Card (OAC) has direct hardware access to the two PCIe cards through VM direct path IO.

D. The OmniStack Virtual Controller(OVC) creates an iSCSI datastore where the hypervisor stores the workload VMs.

In preparation for a customer presentation, you need to create a validated configuration, including services. Which tool should you use?

A. HPE One Configuration Advanced

B. HPE Power Advisor

C. HPE Server Memory Configurator

D. HPE Synergy Planning Tool

E. HPE Proposal Web

A customer is looking to replace their aging data center networking infrastructure with an agile, software-defined solution that will enable them to ensure that their mission-critical applications can always get the bandwidth they need. Which HPE solution should you recommend?

A. StoreFabric

B. Image Streamer

C. OfficeConnect

D. Composable Fabric Manager

After meeting with a customer and gathering basic capacity and performance metrics, you are ready to recommend an HPE 3PAR storage solution.

Which HPE sizing tool should be used to architect the solution, create a ready-to-order bill of materials, and present the customer with a graphic representation of the solution being proposed?

A. HPE Storage Sizer Tool

B. HPE NinjaSTARS

C. HPE InfoSight

D. HPE 3PAR STaTs

Which server technology has the highest cost and lowest latency?

A. DDR-4 Memory

B. NVDIMM

C. NVMe

D. SAS SSD

A customer is looking to better manage their HPE Synergy-based VMware environment. Which VMware extension will reveal critical trends in their environment?

A. HPE OneView for VMware vCenter

B. HPE OneView for VMware vRealize Operations

C. HPE OneView for VMware Operations Manager

D. HPE OneView for VMware vCenter Log Insight

A customer is considering purchasing an application that requires a highly-available NUMA platform that will scale up to 16 processors. They ask you which HPE compute solution will meet their needs. Which solution should you recommend?

A. HPE BladeSystem

B. HPE ProLiant DL

C. HPE Synergy

D. HPE Superdome Flex

A customer is planning to refresh their network infrastructure, and wants to manage bandwidth for critical applications and gain end-to-end visibility of network performance and utilization. They also need tools to help them manage their networking inventory.

Which HPE Solution should you recommend?

A. OneView for VMware vCenter

B. Composable Fabric Manager

C. Introspect

D. InfoSight

Which tool can be used to provide TCO and ROl analysis of an HPE Synergy solution?

A. HPE infoSight

B. HPE Synergy Planning Tool

C. HPE OneView

D. HPE Aliean Tool

A customer wants to replace aging data center networking infrastructure with an agile, software- defined solution that will enable them to ensure that mission-critical applications can always get needed bandwidth Which HPE solution should you recommend?

A. Composable Fabric Manager

B. Image Streamer

C. OfficeConnect

D. StoreFabric