HPE0-S52 Online Practice Questions and Answers

HOTSPOT

You have to remove a Synergy Composer from the first frame so it can be installed in a second frame. Click on the composer to be removed.

Hot Area:

During HPE BladeSystem implementation, you need to update firmware of the Virtual Connect modules installed in this enclosure. This enclosure is not managed by HPE OneView. Which tool can be used to update firmware in VC modules?

A. Onboard Administration

B. Insight Display

C. Virtual Connect Support Utility

D. Virtual Connect Manager

Which key differentiator is new to the Gen10 ProLiant servers?

A. UEFI Bios

B. HPE Flexible Network adapters

C. HPE Smart Memory

D. Firmware recoverability

A customer has a requirement change where prior to decommissioning a server they must perform a secure erase of the server. Which iLO license should you include in the new proposal for server hard ware going forward?

A. HPE iLO Advanced

B. HPE iLO Standard

C. HPE iLO Essentials

D. HPE iLO Advanced Premium Security Edition

What should you use to validate a supported HBA firmware for connecting to an HPE 3PAR array?

A. HPE Single Point of Configuration Knowledge (SPOCK)

B. Smart Update Manager

C. Operating System Support Matrix website

D. Unified Extensible Firmware Interface (UEFI)

Your customer wants to use HPE OneView to update firmware for a new HPE BladeSystem enclosures. Which HPE OneView license is required?

A. iLO Advanced

B. OneView Advanced

C. iLO Advanced Premium Security Edition

D. OneView Standard

The HPE 800W Flex Slot Platinum Plus Hot Plug Low Halogen Power Supply has a built-in Lithium Ion battery to provide backup power to which component?

A. Workload Accelerators

B. Smart Array Flash cache

C. Load Reduced DIMMS

D. Persistent Memory

A customer wants to migrate their existing datacenter operations from 2U DL380 G7 servers to a 1U Gen10 server with equivalent sockets available.

Which system best fits their needs?

A. DL386 Gen10

B. DL360 Gen10

C. DL560 Gen10

D. DL380 Gen10

A customer with a DL380 Gen 10 server uses an HPE Smart Array controller with a 96 WATT Smart Storage Battery. They want to add 16 GB NVDIMMS in the remaining memory slots. They are concerned about retaining data if a power

outage occurs.

What can you explain to them about the Smart Storage Battery configuration to address their concerns?

A. They need an additional 12 WATT Smart Storage Battery.

B. The current battery will support both the NVDIMMS and the Smart Array controller.

C. they need an additional 96 WATT Smart Storage Battery.

D. The system cannot support the NVDIMMS.

A customer wants to evaluate management software that will allow them to deploy firmware updates and monitor the health of their existing Gen9 and Gen10 servers. What must you include in the PoC for the evaluation?

A. HPE OneView

B. HPE One Configuration Advanced

C. HPE Insight Online

D. HPE Intelligent Provisioning

What is a new feature in gen10 ProLiant servers?

A. Smart Memory technology

B. Scalable Persistent Memory

C. Active health System log

D. RESTful API interface

What is one advantage of using HPE Gen10 DDR4 Smart Memory over HPE Gen10 Standard DDR4 memory?

A. Smart Memory has the same large capabilities but better cost savings.

B. Smart Memory has up to 2666 MT/s speed, but standard does not.

C. Smart Memory does not need a Smart Battery for backup, where Standard memory does.

D. DDR4 Smart Memory has up to128 GB capacity.

What is the purpose of the HPE iLO5 Service Port?

A. Configure InSight Remote Support.

B. Enable server connection to HPE OneView.

C. Troubleshoot server issues using direct connectivity.

D. Perform the Virtual Connect module firmware update.

A customer has a Gen10 ProLiant server with SATA 6Gb 7.2k based drives in a Raid 5 configuration. They constantly receive internal complaints about slow performance. When they investigate the server, they are regularly discovering failed

drives and write performance response times are near 20ms.

Based on this information, what recommendation should you offer to help with the slow performance and failing drives.

A. Replace HDD with SAS 12GB drives

B. Replace the current controller with an E-class based model.

C. Install MDL disk drives

D. Migrate from Raid 5 to Raid 6.

Which workloads are appropriate for a DL580 Gen10 Server? (Select three.)

A. business processing and intelligence

B. data warehousing

C. file and print

D. IIS web server

E. SAP HANA