HPE0-J68 Online Practice Questions and Answers

A customer with restricted budget has an existing HPE 3PAR storeserver 8200 using 10kfast class and near line drives because of the implementation of new application .the workload has shifted to be read intensive therefore ,they want to increase the read I/O performance What should they add to their environment?

A. A tier with 15k fast class 600 GB drive for new CPG, configure AO policy to advantage of new resources

B. Two 400 GB SSD drives and enable adaptive flash cache (page 173) eed to check

C. A tier with 15k fast class drive and implement thin provisioned deduplicated virtual volumes

D. A tier of SSD and implement thin provisioned virtual volume

A large organization is experiencing exponential data growth of object storage due to recent mergers and acquisition .They need an on-premise solution to optimize cost at petabyte scale Which components should you recommend for a software-defined solution ?(select two)

A. HPE Appolo 4510 server

B. HPE Complete -Scalability RING

C. HPE Synergy 660 Gen10 compute modules

D. HPE complete -CTERA

E. HPE 3PAR Storeserv 9450c

Which storage protocol is supported by virtual connect Flex-10?

A. FCoE

B. FC

C. ISCSI

D. FCIP

A customer needs to be manually map out preferred paths within a multi-switch fabric, based on application ,priority ,and topology, while allowing failover to a non-preferred path if the preferred path fails, Which B-series FC switch functionality should be used to provide this?

A. Quality of services

B. Enhanced group management

C. Frame filtering

D. Traffic isolation Zones

You are designing a new HPE 3PAR StoreServ all-flash array for the customer.. Which ratio should you expect to have the highest efficiency?

A. Read/write ratio

B. Reclamation ratio

C. Compaction Ratio

D. Thin provisioning ratio

Refer to the exhibit:

Which type of data format do you expect in the red rectangle?

A. 172.16.31.11/24

B. 94:b4:0f:cd:34:8a

C. iqn.2015-02.com.hpe:oneview-vcgeDav000

D. 20110002AC00736E235.524

After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC) configuration and want to raise it from 256 to 768GB. Which action is needed to take advantage of the new AFC configuration?

A. Remove flash cache for all VVS then run create Flash cache

B. Increase current AFC configuration to reflect the additional space

C. Remove the old AO configuration and recreate a new one

D. Run tunesys after raising the AFC to take advantage of the additional space

You are presenting a Nimble solution based on CS3000 hardware to a customer. Which support advantage will be provided with this solution(select two)

A. Customers always interact with a 3rd level support engineer ,when needed

B. Customers only have to deploy a service processor for automating support tasks.

C. Infosight handles the work of 1st and 2nd level support specialist Infosight offers predictive analytics and integration into HPE support center using insight Online.

D. Infosight performs firmware and software updates without additional administrative support.

A customer recently acquired another company and found that the existing infrastructure was outdated and costly to maintain. They need to put a complete infrastructure solution in place that minimizes the footprint in the data center as quickly and possible. Which solution you recommend?

A. Simplicity 380

B. Bladesystem 7000

C. Converged systems

D. Synergy 12000

A customer with several HPE 3PAR StoreServ arrays has reported latencies with newly updated applications.

You have proposed changes to the AO configuration and need to provide high-resolution reports on how the change has affected the latencies.

What should you propose on delivering the service time and I/O workload information daily for you and the customer?

A. Use IMC to schedule performance data gathering and email delivery.

B. Schedule SSMC System Reporter to send the defined email reports.

C. Enable the Service Processor to gather Performance data and schedule data transfer.

D. Login to InfoSight and analyze Advanced Performance history.

An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak business hours with an OLTP application. They have enabled tiering using all drive types. What could be used to resolve the issue?

A. Dynamic Optimization using tier 2

B. Adaptive Optimization using tier 1

C. Dynamic Optimization between tier 0 and tier 1

D. Dynamic Optimization using tier 1

You are planning an upgrade to a customer's existing HPE 3PAR StoreServ 8200 to include 4-port 16Gb FC adapters. The servers are zoned to see the storage via four paths. The customer is concerned about storage availability during the upgrade.

Which statement is correct about performing this upgrade?

A. When NPIV is enabled, the HPE 3PAR Port persistence will show all four paths to the servers.

B. The MPIO service will do a failover, and the servers will continue to have access via two paths.

C. Windows servers require host explorer is installed to ensure MPIO is unaffected.

D. As long as MEM driver is installed on VMware vSphere, no path failures are seen.

A customer is interested in integrating their HPE 3PAR StoreServ arrays into their OneView environment to support automated volume provisioning. What must you install to enable the integration?

A. HPE SAN Network Advisor Enterprise

B. HPE SAN Network Advisor Professional

C. 3PAR Host Explorer

D. OneView Global Dashboard

Which storage feature is supported by both the HPE StoreVirtual and the HPE 3PAR StoreServ storage, and is a key differentiator of HPE storage solutions in the industry?

A. Network RAID

B. Peer Motion

C. virtual Copy

D. Dynamic Optimization

Users are complaining about poor performance with their Data Warehouse application.

What is an effective solution to increase their performance at minimal cost?

A. HPE 3PAR Adaptive Flash Cache

B. HPE 3PAR Priority Optimization

C. HPE 3PAR Dynamic Optimization

D. HPE 3PAR Adaptive Optimization