EMC E22-258 dumps - 100% Pass Guarantee!

In an XtremIO quad X-Brick cluster, what is the required number of BBUs?

A. 2

B. 4

C. 6

D. 8

The XtremIO Management Server (XMS) reports that an XtremIO cluster has a compression ratio of 1.7:1 and a deduplication ratio of 3.1:1. What is the reported data reduction ratio?

A. 0.6:1

B. 1.8:1

C. 4.8:1

D. 5.3:1

XtremIO storage is assigned to a host. If the host has the HBA execution throttle set to 256, what effect will this have on the system?

A. Queue depth for each HBA port will be set to 256

B. Each LUN visible to the port will have a queue depth set to 256

C. Aggregate queue depth for all HBA ports will be set to 256

D. Each LUN visible to the port will have a queue depth set to 256 / <# HBA ports>

How many disk failures will XtremIO Data Protection (XDP) allow in a DAE?

A. One disk failure; a second simultaneous failure causes data unavailability

B. Up to six sequential SSD failures; subsequent failures cause data loss

C. Two simultaneous disk failures; the system shuts down if a third occurs

D. One disk failure per private RAID Group; the system shuts down if a second occurs

A host with two HBAs is zoned to an XtremIO two X-Brick cluster through two FC switches. Which zone set meets the requirements for high availability?

A. Switch 1: HBA0 to X1-SC1-FC1, X1-SC2-FC1, X2-SC1-FC1, X2-SC2-FC1 Switch 2: HBA1 to X1-SC1FC2, X1-SC2-FC2, X2-SC1-FC2, X2-SC2-FC2

B. Switch 1: HBA0 to X1-SC1-FC1, X1-SC1-FC2, X2-SC1-FC1, X2-SC1-FC2 Switch 2: HBA1 to X1-SC2FC1, X1-SC2-FC2, X2-SC2-FC1, X2-SC2-FC2

C. Switch 1: HBA0 to X1-SC1-FC1, X1-SC1-FC2, X2-SC2-FC1, X2-SC2-FC2 Switch 2: HBA1 to X1-SC2FC1, X1-SC2-FC2, X2-SC1-FC1, X2-SC1-FC2

D. Switch 1: HBA0 to X1-SC2-FC1, X1-SC2-FC2, X2-SC1-FC1, X2-SC1-FC2 Switch 2: HBA1 to X1-SC1FC1, X1-SC1-FC2, X2-SC2-FC1, X2-SC2-FC2