EMC DES-4121 dumps - 100% Pass Guarantee!

A user has a fully configured PowerEdge R640 and an iSM installed on their Windows 2016 operating system. They now want to install OMSA to enable them to have alerts sent out in-Band to a management console.

What does the user need to consider?

A. OMSA can be installed on the same operating system with ISM, provided both OMSA and iSM have the same firmware version revisions.

B. iSM must be uninstalled before OMSA is installed.

C. iSM must be installed before OMSA can be installed.

D. OMSA can be installed on the same operating system with iSM without restrictions.

Eight new servers have arrived at a datacenter. All use static IP addresses for iDRAC. The technician needs to enable these servers to contact the DHCP server on the network to obtain new IP addresses.

What method can the technician use to quickly switch to DHCP?

A. Reboot each server to enable DHCP default settings

B. Boot into CTRL+S and change iDRAC settings to DHCP

C. Use the LCD panel to input a new IP address

D. Log in to the iDRAC and enable DHCP

A technician is experiencing a compatibility issue that causes network disconnects between the iDRAC firmware and an application that is running. The iDRAC must be rolled back to the last working version. The Enterprise licensed server cannot be rebooted outside scheduled maintenance windows. The next scheduled window is one month away.

Where should the technician perform the Firmware Rollback?

A. Dell System Update Utility

B. iDRAC GUI

C. Repository Manager

D. Lifecycle Controller

A technician is troubleshooting a server with the following components:

Two CPUs Memory installed in sockets A1, A2, A3, A4, A5, A6, B1, B2, B3, B4, B5 and B6 Expansion cards installed in all expansion slots 6x 1 TB drives configured as a RAID 6 virtual disk The server has the following symptoms: CPU2 has failed Memory in slots B1, B2, B3, B4, B5 and B6 is not accessible Some of the expansion cards have gone offline.

What should the technician do to resolve this issue?

A. Replace the failing CPU, failing memory, and expansion cards

B. Replace the system board

C. Replace CPU2

D. Reboot the server, access the Lifecycle and re-enable CPU2

A technician is sent on-site to troubleshoot a server that produced an error message during the most recent POST but then completed the POST and booted to the operating system. The user cannot remember the specific error and no entry was made in the error log relating to this error.

How can the technician find out what the error message was?

A. Access the Lifecycle Controller and view the last boot cycle video capture entry.

B. Export the Server profile and analyze for any POST errors.

C. Reload the BIOS firmware.

D. Access the iDRAC and view the last boot cycle video capture entry