Certbus > Axis Communications > Axis Network Video > AX0-100 > AX0-100 Online Practice Questions and Answers

AX0-100 Online Practice Questions and Answers

Questions 4

Match the following descriptions to their proper IP rating below. Drag each gray box from the left column to the matching blue box in the right column.

Select and Place:

Browse 150 Q&As
Questions 5

Which of the following are outdoor rated products? (Choose two)

A. AXIS M3114-R

B. AXIS P3304-VR

C. AXIS P1344-E

D. AXIS P3344-VE

E. AXIS M1031-W

Browse 150 Q&As
Questions 6

A customer has a lot of motion blur on recordings from a fixed camera. What would be the most likely setting to address the blurring?

A. Gain level

B. Brightness

C. Backlight compensation

D. Shutter speed

Browse 150 Q&As
Questions 7

In a switched network with Unicast

A. Data packets are sent only to one recipient no other computers will receive the data.

B. Data packets can only be sent in one direction, for example from the camera to the server.

C. Only one camera at a time can send data packets through the network, to avoid congestion.

D. All data packets are transmitted in a unified size, enabling network optimization.

Browse 150 Q&As
Questions 8

The purpose of a DNS server is to

A. Allocate IP addresses to devices within a network.

B. Allocate MAC addresses to devices within a network.

C. Translate host names such as www.axis.com to IP addresses.

D. Translate host names such as www.axis.com to MAC addresses.

Browse 150 Q&As
Questions 9

Looking at the picture below, which setting would best address the blurring that's occurring with faster moving objects?

A. Increase image brightness

B. Adjust the exposure settings

C. Uncheck backlight compensation

D. Increase image contrast

Browse 150 Q&As
Questions 10

What is the maximum distance for a 10OBaseTX Ethernet carrying 802.3at PoE connection between a switch and a camera without any extenders or repeaters?

A. 50 m (164 ft)

B. 100 m (328 ft)

C. 150 m (492 ft)

D. 500 m (1640 ft)

Browse 150 Q&As
Questions 11

Which is the main advantage of Axis P-iris technology?

A. It improves low light performance

B. It reduces purple fringing

C. It limits motion blur

D. It optimizes the aperture, limiting artifacts

Browse 150 Q&As
Questions 12

The advantage of using multicast in the network is that

A. Many cameras can share the same network connection.

B. The video stream reaches every computer in the network simultaneously.

C. The video stream only needs to be sent once, even though there are multiple viewers.

D. The video stream is rerouted in case of network dropout.

Browse 150 Q&As
Questions 13

When choosing a camera for extreme low temperature environments, how would Arctic Temperature Control ensure camera longevity?

A. The product is always kept cold

B. The product can handle low ambient temperatures

C. The product is protected against extreme temperatures

D. The product performs a stepped start-up at low ambient temperature

Browse 150 Q&As
Questions 14

A VPN

A. Is required to enable viewing network surveillance video on mobile devices.

B. Is a network specially optimized to handle video data packets.

C. Creates a secure tunnel through the network, where your information travels encrypted.

D. Translates domain names to IP addresses, according to the IPv4 standard.

Browse 150 Q&As
Questions 15

Where is the best place to mount a camera with a fixed iris?

A. Outside, on a pole

B. Inside, in a room with large windows

C. Outside, in a shadowed position

D. Inside, in a room with very strong light sources

Browse 150 Q&As
Questions 16

When dealing with a poorly lit scene, which of the following options would most improve image quality?

A. Adding light

B. Adjusting exposure settings

C. Adjusting brightness

D. Changing camera placement

Browse 150 Q&As
Questions 17

Which one of the following camera parameters may become a limiting factor for the camera in delivering full frame rate?

A. Noise reduction

B. Exposure time

C. Flicker-free mode

D. Aspect ratio 16:9

Browse 150 Q&As
Questions 18

In an Ethernet network, broadcast traffic is received and processed by

A. All devices on the network, making it unsuitable for network video since the network load would be unacceptable.

B. All devices on the network, making it suitable for network video since any device can access the video without any overhead from establishing a separate connection to the server.

C. Only those devices that have registered with the server to receive the traffic, making it unsuitable for network video, due to the overhead from establishing a separate connection to the server.

D. Only those devices that have registered with the server to receive the traffic, making it suitable for network video since the network load would be kept reasonable.

Browse 150 Q&As
Exam Code: AX0-100
Exam Name: Axis Network Video Exam
Last Update: Apr 19, 2024
Questions: 150 Q&As

PDF

$45.99

VCE

$49.99

PDF + VCE

$59.99