5V0-42.21 Online Practice Questions and Answers

A customer has deployed VMware SD_WAN solution An administrator asked to imported additional security for traffic going to internet without investigating in new hardware solutions.

A. Service chaining with DFW in NSX-V

B. Service chaining with Zscaler Cloud Security Service

C. Service chaining with DFW in NSX-1

D. Service chaining with AWS Cloud Security

Which deployment model ensures that management and control plane is cloud-delivered while data continues to flow on-premises between VMware SD-WAN nodes that remain on-premises?

A. Hosted SD-WAN Orchestrator/Controller

B. On-premises SD-WAN Orchestrator/Controller

C. Partially on-premises

D. All on-premises

Company a has recently acquired Company B, which has two remote office. Company A is using VMware hosted Cloud Gateways, and Company B is using a VMware SD-WAN with a Hub-Spoke topology. Which VEware Cloud VPN solution an administrator configure to establish connectivity between the offices of Company A and Company B?

A. Site-to-Site VPN

B. Branch to CASH

C. Branch to Branch VPN

D. Branch to Non VMware SU-WAN Site

A service provider needs to ensure that the NOC is notified proactively in the event that an Edge interface

loses connectivity to its WAN provider.

Which three methods are available for generating these alerts? (Choose three.)

A. Slack notification

B. Text/SMS

C. Push notification via the VMware SD WAN mobile app

D. SNMP Trap

E. Webhook

F. Dyinq Gasp

A service provider wants to offer a common service from its data center via VMware SD-WAN Partner Gateway to many customers with overlapping IP addresses. Which configuration must be implemented?

A. Define multiple segments tor each customer

B. Enable NAT hand off under hand off static routes configuration

C. Enable tag type QinQ under hand off interface configuration

D. Configure source policy-based NAT under business- policies configuration

During a VMware SD-WAN design session for a core business application, a customer expressed the

following requirements:

Allow business abstraction so that similar policies can be applied across different hardware types.

Eliminate the need for the operations team to know the type of physical connectivity or the WAN carrier.

Maintain SLA for real-time application.

Which design should be taken in terms of Link Steering?

A. Select WAN Link, and then define the DSCP tagging

B. Select Error Correct Before Steering with % definition

C. Select Transport Group, and then select Preferred option.

D. Deselect Error Correct before Steering Defaults.

An Enterprise customer just acquired a new company, and the Network Enterprise administrator was tasked to integrate over 20 new branches into their existing SD-WAN network. However, these branches have overlapping IPs with the existing branches subnets.

A. Configure a NAT hand off rule at the VMware SD WAN gateway assigned to these new blanches, translating the new branch subnets into a new nan-overlapping subnet

B. Configure a LAN-side NAT rule at the branch device settings, translating its subnets into a new non-overlapping subnet

C. Configure a NAT firewall rule in each branch, translating its subnets into a new non-overlapping subnet

D. Configure a policy based NAT tor each branch translating its subnets Into a new non-overlapping subnet

Company A has recently acquired Company B and needs to establish network connectivity. Company A has only Cisco for firewalls and VPN. Company B is using VMware SD-WAN. Which VMware SD-WAN Cloud VPN solution should an administrator configure to establish connectivity?

A. Branch to Non VMware SD-WAN Site.

B. Branch to SD-WAN Hub

C. Branch to Main Office VPN

D. Branch to Branch VPN

What are three key benefits of VMware SD-WAN? (Choose three )

A. Provision Edges in minutes

B. Automated configuration of cloud resources

C. Remove requirement of Edge devices

D. Gain visibility across any link

E. Layer 2 VPNs between sites

F. Reduce the burden on MPLS

An enterprise has deployed a VMware SD-WAN solution with Edges in many different located to different

Partner Gateways.

Which design makes it possible to have dynamic branch to branch VPN tunnels between any two Edges?

A. Dedicated at least one Gateway as a Controller, and few initial data plane packets will travers the Controller before dynamic tunnel is established between the two branches.

B. Add Controller role to each Partner Gateway.

C. Configure each partner Gateway as a Controller.

D. Dedicate at least one Gateway as a Controller, and no data plan packets will traverse the Controller before dynamic tunnel is established between the two branches.

A customer is using hypervisor to install VMware Partner Gateways. Which two hypervisors may be used? (Choose two.)

A. Hyper-V

B. Kubermetes

C. XenServer

D. KVM

E. ESXi

A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer's branches and data centers. The network architect would like to achieve control plane redundancy. Which action, if any, should be taken to meet this goal?

A. Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already

B. Multiple VCFs at data centers can be contoured to function as route reflectors to achieve control plane redundancy.

C. VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy.

D. VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy

Which statement describes a characteristic of VMware SU-WAN Edge (VCL) clustering?

A. One VCE cluster can be formed with both virtual and hardware at the same lime

B. A VCE cluster requires one dedicated interface for HA sync

C. VCF clusters member sync flow tables between themselves.

D. VCE cluster members should have unique IP addresses on its WAN interfaces

Due to very strict security policies an enterprise customer is looking for an on-premises deployment of the VMware SD-WAN Orchestrator and Controllers. Customer data is not expected to flow through this Controller, however it is desirable that management plane traffic towards the Orchestrator coming from VMware SD-WAN Edges can take the overlay tunnels through this controls. What are some of the needed steps to achieve the requirements above?

A. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and enable management plane forward

B. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and add static host routes with NAT hand off settings porting to the Orchestrator IPs under Partner Gateway advanced hand off settings

C. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plane and Partner Gateway role and add static host mules with NAT hand off settings pointing to the Orchestrator IPs under Partner Gateway advanced hand off settings

D. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plant- and Partner Gateway role and add a static default route with NAT hand off settings under Partner Gateway advanced hand oft settings

A service provider assigns two Partner Gateways to a VMware SD-WAN Edge. Which description is correct about default route.

A. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway

B. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.

C. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0 0.0/0 to the Edge.

D. The service provider administrator decides whether the Partner Gateway advertises a default route 0.0.0.0/0 or not, although it is advertised by default.