500-920 Online Practice Questions and Answers

When server is booting from SAN, which command verifies the PLOGI sessions with the target?

A. Lunmap

B. Lunlist

C. FCMap

D. FCIist

Which two formats can be configured for Cisco's Call Home email message? (Choose two )

A. JSON

B. CSV

C. Full text

D. XML

Which Cisco UCS internal component maintains the UCS XML database, manages the FSM stages and operations and instructs the Application Gateway to perform operations on physical and logical elements?

A. Cisco Data Management Engine

B. Cisco UCS Manager

C. Cisco Application Gateways

D. Cisco Finite State Machine

Which statement best describes managing Cisco UCS servers using NX-OS CLI on the Fabric Interconnects?

A. The NX-OS CLI on the Fabric Interconnects allows you to view, but not change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.

B. The NX-OS CLI on the Fabric Interconnects allows you to manage QoS parameters on the Fabric Interconnects and an upstream LAN switch

C. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the servers and Fabric Interconnects

D. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.

Which two ports on a pair of Cisco Fabric Interconnects must be properly cabled for the pair to form a cluster? (Choose two )

A. L1 > L1

B. L1 > L2

C. L2 > L2

D. L2 > L1

When booting up a Cisco UCS Server you want to see boot time diagnostic messages of the POST, what action is required for you to do so?

A. Enable Quiet Boot on the Server's BIOS

B. Restart the Server

C. Disable Fast Boot on the Server's BIOS

D. Enable Quiet Boot on the Server's Service Profile

E. Disable Fast Boot on the Server's Service Profile

When troubleshooting, which option is the primary uses of the SCOPE command?

A. To access the log files on the log server

B. The SCOPE command is not helpful in this case

C. To access the log files on the virtual machines

D. To access the log files that reside in a component

Which statement is true regarding the UCS Manager GUI is showing "Overall Status Unassociated" in the General tab for a C-series server?

A. The server has a service profile assigned, but has connectivity issues with UCS Manager

B. The server is not properly connected

C. The server does not have a service profile assigned, but has been discovered by UCS Manager

D. The server has been properly connected, but has not been discovered by UCS Manager

The command show interface veth 705 is telling you that the bound interface is Ethernet 3/1/2

What is the location of the blade that has veth 705 associated to it?

A. Chassis 3, Slot 1

B. Chassis 3. Slot 2

C. There is not enough information

D. Chassis 1. Slot 2

When troubleshooting a LAN connectivity issue, you notice a failed uplink from the Cisco UCS Fabric Interconnects to the upstream LAN switch. What two could be causing the issue? (Choose two )

A. Misconfigured VLAN on the failed uplink

B. Misconfigured QoS parameters on the failed uplink

C. A port channel mismatch between the Fabric Interconnects and the upstream LAN switch

D. A SFP Type mismatch between the Fabric Interconnects and the upstream LAN switch

E. A port speed configuration mismatch between the Fabric Interconnects and the upstream LAN switch

After performing a UCS firmware upgrade, which two UCS components will require updated drivers? (Choose two )

A. VIC Cards and Fiber Channel HBAs

B. Cisco Fabric Interconnects

C. Cisco UCS Manager

D. RAID Controllers

In order to create an Inband Profile for Cisco Integrated Management Controller (IMC) connectivity, what do you need to perform first?

A. Create a Management IP Pool, a MAC Address Pool, and a VLAN Pool

B. Create an IPMI Policy

C. Create a Service Profile

D. Create different VLANs, with different VLAN IDs

E. Create a Management IP Pool, a VLAN. and a VLAN Group

A new UCS dual fabric cluster is being configured with a single chassis. The administrator notices that the cluster is not in High Availability (HA) mode. What is the possible cause?

A. No uplinks are active into the data center.

B. The links to the chassis are not enabled

C. The HA plugin has not been installed in UCS Manager

D. The UCS-FI-HA license has not been activated in UCS Manager

Which two interfaces allow access to Cisco UCS Manager? (Choose two )

A. Cisco KVM

B. Cisco UCS Manager XML API

C. Cisco IMC

D. Cisco UCS Manager GUI

Which statement is true when using SPAN for Fibre Channel (FC) Traffic?

A. FC port on Cisco UCS 6238UP can be used as a SPAN source

B. When defining FC uplink port as the SPAN destination, system will automatically stop using that port as an uplink port

C. Any port can be used as a SPAN destination port Even if it is defined as Eth uplink port it will be automatically converted to FC uplink port

D. For FC SPAN sessions we do not have to specifically enable the monitoring session