Oracle 1Z0-996 dumps - 100% Pass Guarantee!

Your client has the following requirements:

Many customers are installing their own solar electrical generation equipment. When these customers generate more electricity than required for their own use, the surplus can he exported back to the power grid.

In order to measure this generation, we have installed special scalar devices. These devices have separate registers to measure the energy generated (export) and the energy received (import) from the National Grid. Both reads will be stored in kWh, but the import is subtractive and export is consumptive.

What solution should you choose to configure the measuring component types for these specific requirements?

A. Create two service points: one for subtractive import and the other for consumptive export.

B. Create one new measuring component type for creating two measuring components (one for import and the other for export) that will be linked to one scalar device.

C. Create one new measuring component type for creating a new measuring component that will be linked to two different scalar devices (one for import and the other for export).

D. Create two new measuring component types (one for subtractive import and the other for consumptive export) to enable the creation of two measuring components that will be linked to one scalar device.

As part of the service order processing, the algorithm D1-CNSPINSDV (Connect SP and/or Install Device) determines if a specific activity needs to be created based on the state of the service point.

Based on the status of the service point, what can this algorithm create?

A. Device

B. Device Configuration

C. Smart Meter Command

D. Service Point

Which usage rule would be used to retrieve scalar measurements and convert the total from one unit of measure to another?

A. Get Scalar Details and Math

B. Get Scalar Details and Apply Formula

C. A custom set of usage rules must be written.

D. Get Scalar Details and Axis Conversion

Usage transactions can contain date breaks. Which is used to supply date breaks?

A. the Deferred Monitor Calculation Algorithm

B. the Usage Subscription Type

C. the requesting system or user input

D. the Usage Subscription BO

Which option correctly describes the high-level process from loading measurements through calculating usage?

A. 1. Load Initial Measurements

2.

Validate, edit, and estimate Initial Measurements

3.

Create Final Measurements

4.

Update Initial Measurements

B. 1. Load Initial Measurements

2.

Verify, evaluate, and enter Initial Measurements

3.

Create Final Measurements

4.

Calculate Usage

C. 1. Load Initial Measurements

2.

Validate, evaluate, and estimate Initial Measurements

3.

Update Initial Measurements

4.

Calculate Usage

D. 1. Load Initial Measurements

2.

Validate, edit, and estimate Initial Measurements

3.

Create Final Measurements

4.

Calculate Usage