1Z0-996-21 Online Practice Questions and Answers

Critical validation rules verify the integrity of the initial measurement data (IMD). If an implementation needs to add new critical validations, where would you configure them?

A. as new lifecycle algorithms on the IMD Seeder BO (D1-IMDSeeder)

B. in the pre-processing algorithm of the IMD Seeder BO (Dl-IMDSeeder)

C. as options on the IMD Seeder BO (D1-IMDSeeder)

D. in the schema of the IMD Seeder BO (D1-IMDSeeder)

E. in the validation algorithm on the IMD Seeder BO (D1-IMDSeeder)

Your client has the following requirements:

Many customers are installing their own solar electrical generation equipment. When these customers generate more electricity than required for their own use, the surplus can he exported back to the power grid.

In order to measure this generation, we have installed special scalar devices. These devices have separate registers to measure the energy generated (export) and the energy received (import) from the National Grid. Both reads will be stored in kWh, but the import is subtractive and export is consumptive.

What solution should you choose to configure the measuring component types for these specific requirements?

A. Create two service points: one for subtractive import and the other for consumptive export.

B. Create one new measuring component type for creating two measuring components (one for import and the other for export) that will be linked to one scalar device.

C. Create one new measuring component type for creating a new measuring component that will be linked to two different scalar devices (one for import and the other for export).

D. Create two new measuring component types (one for subtractive import and the other for consumptive export) to enable the creation of two measuring components that will be linked to one scalar device.

Which two plug-in spots can call the rating functionality using base package-supplied algorithm types? (Choose two.)

A. Adjustment Type - Adjustment FT Creation

B. Billable Charge Template

C. Bill Segment Type - Bill Segment Create

D. Adjustment Type - Generate

E. Bill Segment Type - Bill Segment FT Creation

Within the application, operational devices can be assets or components.

Which two statements are true about components? (Choose two.)

A. Components are attached to assets.

B. Components have a disposition that tracks their location and status.

C. Components can be installed at locations.

D. Components are not a class of assets.

E. Components can't have specifications.

Which major entities hold the key geographic, demographic, and financial information related to a customer who is financially responsible for a property?

A. Account, Bill, Customer Class, Premise, Service Agreement

B. Account, Bill, Premise, Service Agreement, Service Port

C. Account, Person, Premise, Service Agreement, Service Port

D. Account, Customer Class, Person, Premise, Service Agreement

E. Account, Customer Class, Premise, Service Agreement, Service Port

Which two statements about usage subscription types are correct? (Choose two.)

A. Usage subscription types define the main billing contact.

B. Usage subscription types define the time zone.

C. Usage subscription types define the valid service point types.

D. Usage subscription types define the recipient of the usage.

Approval Profiles control which aspects of an Adjustment?

A. whether current and/or payoff balance are affected by the adjustment

B. control how adjustments are approved

C. if an adjustment requires approval before it's frozen

D. information defaulted on an Adjustment

E. whether the adjustment should appear on the customer's next bill

A usage subscription must exist before usage transactions can be calculated for a specific service point.

Where do you configure the usage recipient?

A. in the Usage Rule Type

B. in the Service Point Type

C. in the Device Type

D. in the Measuring Component Type

E. in the Usage Subscription Type

Which three statements are true about initial measurements, final measurements, and usage? (Choose three.)

A. Usage is a synonym for bill determinants.

B. The initial measurement data can be optionally stored in Raw format.

C. A service point can have more than one initial measurement for the same period, but only one final measurement.

D. Final measurements can be directly edited or updated by users or by automated processes as required.

E. Usage is loaded in the application to generate final measurements.

How should you configure the derived values that are relevant for a device?

A. Configure the derived values on the Measuring Component for the measuring components to be defined on the device.

B. Configure the derived values on the Measuring Component Type for the measuring components to be defined on the device.

C. Configure the derived values on the Device Type for the derived values to be defined on the device.

D. Configure the derived values on the Final Measurement Type for the measuring components to be defined on the device.

Which three statements are correct for Adjustment Types? (Choose three.)

A. They can default an Adjustment Amount to adjustments.

B. They control how adjustments appear on bills.

C. They control whether a rate is to be called to calculate an adjustment amount.

D. They control the valid Service Agreement Types that adjustments can be linked to.

E. They control the valid Adjustment Profiles that adjustment types can belong to.

When a customer has a specific price for a defined quantity which is different to other customers, where is this specific price for the related Bill Factor defined?

A. Bill Factor Characteristic

B. Bill Factor Value

C. Service Agreement - Contract Value

D. Calculation Rule

E. Account Characteristic

Your client has three requirements:

1.

Apply validations on meter reads coming from the Data Collectors.

2.

If a meter read does not pass the validation, an error will be generated and assigned to a user.

3.

Retry the validation every 30 minutes for the errors in case the issue is related to configuration. Which statement describes the base functions you should use?

A. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-COMP-TD (Complete To Do Entries).

B. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-IMD-RETRY (Retry Initial Measurement Data Processing)

C. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be loaded after 30 minutes.

D. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-CRE-IMDTD (Create To Do)

E. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be manually loaded.

Your customer's initial measurement data (IMD) has been imported and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.

What can you assume that the IMD has passed?

A. Critical Validation

B. Multiplier Check Validation

C. Sum Check Validation

D. Critical Validation, High/Low Check Validation, and Sum Check Validation

E. High/Low Check Validation

A Service Order Orchestrator determines the steps required to complete the service.

As an example, based on the state of the service point, what does the Enable Service Orchestrator determine the actions for?

A. Create a Device Configuration; Install a Device; Turn on the Device

B. Connect the Service Point; Install a Device; Create a Usage Subscription

C. Create a Service Point; Install a Device; Turn on the Device

D. Connect the Service Point; Install a Device; Turn on the Device