JN0-130 Online Practice Questions and Answers

When configuring an explicit path, what does the next-address entry identify?

A. the tunnel end point

B. the tunnel start point

C. a specific node to be traversed

D. the node prior to the tunnel end point

Which configuration component is required to allow a PPP over ATM client to connect to one virtual router for a particular session and to a different virtual router for another session?

A. profile

B. domain map

C. IP access-route

D. static IP addressing

Which command initiates a packet trace for all PPP packets on interface atm 6/1.33?

A. log filter debug pppPacket atm 6/1.33

B. log severity debug pppPacket atm 6/1.33

C. log filter debug category pppPacket atm 6/1.33

D. log severity debug category pppPacket atm 6/1.33

Which CLI command disconnects all subscribers on an ATM PVC?

A. clear port 4/3.99

B. logout port 4/3.99

C. clear subscriber port 4/3.99

D. logout subscriber port 4/3.99

What are three characteristics of RIPv1? (Choose three.)

A. Performs classful routing.

B. Implements poison reverse.

C. Includes prefix length in updates.

D. Supports simple password authentication.

E. Broadcasts messages between neighbors.

Which three statements are correct regarding the CLI command, 12tp destination profile to-NewYork virtual-router vr1 ip address 1.1.1.1 ? (Choose three.)

A. LNS IP address is defined.

B. LAC IP address is defined.

C. Virtual-router vr1 sends and receives L2TP traffic.

D. Virtual-router vr1 is the authenticating virtual-router.

E. This command is performed on the LNS.

Router A has a priority of 64, Router B has a priority of 0, and Router C has a priority of 70. Router D now comes online with a priority of 100. Which router is the DIS?

A. Router A

B. Router B

C. Router C

D. Router D

Which two types of routes may be advertised via EBGP? (Choose two.)

A. Routes that do not originate in the local AS and are learned by OSPF.

B. Routes that originate on the local router and are advertised into OSPF.

C. Routes that are transiting the local router and are BGP learned routes.

D. Routes that originate on the local router and are injected using a route map.

By default, an L1/L2 IS-IS router advertises what remote area routes into a Level 1 area?

A. only summarized routes

B. all routes in the network

C. all routes in the backbone

D. No routes are advertised.

Regarding L2TP, in which two situations is a service module or service IOA required? (Choose two.)

A. always for LNS

B. always for LAC

C. LAC with fragmentation in the tunnel

D. LNS when there are greater than 2000 sessions

Which configuration command assigns a host route to the CPE workstation address of 192.168.10.1 in a Bridged 1483 network?

A. ip route 192.168.10.1 255.255.255.255 atm 6/2.1

B. ip route 192.168.10.1 255.255.255.252 atm 6/2.1

C. add route 192.168.10.1 255.255.255.252 atm 6/2.1

D. add route 192.168.10.1 255.255.255.255 atm 6/2.1

Which control expression must be the last line in all macros?

A. <# end #>

B. <# finish #>

C. <# endtmpl #>

D. <# terminate #>

Which TCP port does LDP use for its protocol communications?

A. 464

B. 466

C. 644

D. 646

Which OSPF router type summarizes network advertisements from one OSPF area into another?

A. ABR

B. ASBR

C. edge router

D. backbone router

Two Level 1 routers are exchanging Hello packets with different Area IDs. What occurs between these routers?

A. An Adjacency is formed.

B. No IS-IS PDUs are sent

C. An Adjacency does not form.

D. An Adjacency forms but traffic is not forwarded.