HP HP2-Z30 dumps - 100% Pass Guarantee!

Refer to the network exhibit.

Assume the network shown in the exhibit has implemented RSTP Based on the topology, which port is a root port?

A. SwrtchAport2

B. SwitchD port 1

C. SwitchC port 2

D. SwitchB port 1

What is a key emerging standard protocol that HP Virtual Application Networks (VAN) use to implement Software-Defined Networks (SDN)?

A. IMC

B. OpenFlow

C. FlexFabric

D. OpenStack

Refer to the exhibit.

A network administrator has a server currently connected to an access layer switch. The network administrator needs link redundancy for the server and wants to add a second access layer switch and connect it to the server. Which solution should the network administrator implement to accomplish this goal?

A. Add a Provision switch as the new switch and implement distributed trunking.

B. Add a Provision switch as the new switch and implement IRF.

C. Add a Comware switch as the new switch and implement MSTR

D. Add a Comware switch as the new switch and implement link aggregation.

Refer to the network exhibit.

Switch_A and Switch_B are HP Comware switches currently in the same MSTP region with the following MSTP configuration:

Region name: HP

Revision number 1

Instance 1:VLANs 10 and 11

Instance 2: VLANs 12 and 13

Instance 0: VLANs 1-9 and 14-4094

MSTP is operating correctly on Switch_A and Switch_B. Switch_C and Switch_D are new Comware switches and have been added to the network. The links between the switches are trunks, where VLAN 1 is the PVID and all other VLANs are permitted on the trunks. The only STP command executed on the two new switches is stp enable. Based on this information, what is the resulting Layer 2 topology?

A. All uplinks are blocked until the new switches have MSTP configured correctly.

B. A Layer 2 loop will result, creating a broadcast storm,

C. Only one uplink from each new switch will be utilized.

D. Both uplinks from the new switches are utilized but load sharing is inefficient

Which Software-Defined Network (SDN) layer includes HP Provision and HP Comware switches?

A. control

B. infrastructure

C. operational

D. application